Once you have decided where you want to place your solar or wind LED street light, you need to make sure you have dug the hole properly in the ground.
But how would you do it? Well, there are two possible options for digging the hole.

1. If you go with the excavator then it would only be going to take around 2-3 minutes and you are done.
2. The other option is manually digging the hole by shovel if there’s only one man doing the job it would going to take one hour to complete the job.

This process needs cement because a proper foundation needs to lay down in order to hold the street pole strongly.
This process will take around 20 minutes if done by one person.

This task needs concentration, making sure you have properly connected all the wires with the lights and the battery. If you’re doing it alone it will take your 20 minutes.

The last step towards installing a solar or wind LED street light is to fix the pole in the foundation which you have dogged for.

Try to fix the solar or wind-powered streetlight accurately, because, if in case you do something wrong you have to do it again.

This process is for 5-7 minutes if done with the help of a crane and 2 men. On contrary, if you’re going to do it by hand, this will take around 15-20 minutes. Beside this, you will also need at least four to five men to help you out in installing it properly.

In short, the complete installation will not take longer than 2 hours if done properly and stepwise.